All You Need to Know About Assessment Validation and Validating Assessments

All You Need to Know About Assessment Validation and Validating Assessments

Blog Article

RTOs have numerous responsibilities post-registration, including annual declarations, AVETMISS reporting, and ensuring marketing compliance. Among these tasks, validation often stands out as particularly challenging.

Even though we’ve written about validation several times, let's revisit its definition. ASQA calls validation a quality review of the assessment process.

In other words, validation identifies which elements of an RTO's assessment process are done right and which need improvement. A proper understanding of its key components makes the task less daunting.

As per Clause 1.8 of the SRTOs 2015, RTOs are required to ensure that their assessment systems, including RPL, meet training package requirements and are conducted following the Principles of Assessment and Rules of Evidence.

The standards necessitate conducting two types of validation.

The initial validation type checks that your RTO's assessments align with the training package requirements.

The subsequent validation confirms that assessments are conducted according to the principles of assessment and rules of evidence.

Thus, we understand that validation is done before and after the assessment. This article highlights the first type: assessment tool validation.

Breaking Down the Two Types of Assessment Validation

An Introduction to Assessment Validation

As noted earlier and in our earlier blog entries, validation is split into two stages: (1) assessment tool validation and (2) post-assessment validation.

Assessment tool validation, sometimes called pre-assessment validation, focuses on ensuring all unit requirements are met, in line with the first part of the clause, ensuring complete workbook compliance.

Post-assessment validation, in contrast, is about ensuring the implementation side, where Registered Training Organisations conduct assessments according to the Principles of Assessment and Rules of Evidence.

Our focus in this article will be on assessment tool validation.

How Assessment Tool Validation is Conducted

With a clear understanding of the two types of validation, let’s focus on assessment tool validation.

Best Times to Conduct Assessment Tool Validation

Assessment tool validation seeks to ensure all elements, performance criteria, and performance and knowledge evidence are addressed by your assessment tools.

This means that whenever new learning resources are acquired, assessment tool validation must be performed before they are used by students.

You don't have to wait until your next 5-year validation schedule. Validate new resources right away to ensure they’re appropriate for student use.

Still, this isn't the sole reason for conducting this type of validation. Conduct assessment tool validation when you:

- resources are updated
- you add new training products on scope
- training product updates are reviewed against your course
- learning resources are identified by you as a risk during your risk assessment

ASQA's risk-based approach to regulation necessitates regular risk assessments by RTOs. If there are student complaints about learning resources, it's an opportune time for assessment tool validation.

Which Training Products Should You Validate?

Keep in mind, this validation ensures that all learning resources comply before use. All RTOs must validate resources for each unit.

Resources Needed to Start Assessment Tool Validation

Instructional Resources

To validate assessment tools, you need the complete suite of your learning resources:

Mapping tool – start by investigating this document. It shows which assessment items meet unit requirements, facilitating quicker validation.

Learner/student workbook – assess its appropriateness for use as an assessment tool. Verify clear instructions and adequate answer fields. This is often a gap.

Assessor guide/marking guide – ensure that instructions for assessors are sufficient and clear benchmarks for each assessment item exist. Clear benchmarks are essential for reliable assessment outcomes.

Other related resources – could include checklists, registers, and templates developed apart from the workbook and marking guide. Validate them to confirm they fit the assessment task and meet unit requirements.

Panel of Validators

Clause 1.11 specifies the requirements for validation panel members. It states validation can be performed by one or more people. However, RTOs usually require all trainers and assessors to participate, sometimes including industry experts.

Your validation panel, as a group, must possess:

Current vocational competencies and relevant industry skills for the unit being validated

Current knowledge and skills related to vocational teaching and learning

Any one of the following training and assessment qualifications:

TAE40116 Certificate IV in Training and Assessment or the equivalent successor

Validation checklist/template
Having a validation tool helps you with both the validation process and documentation. Using a validation tool makes it easier to look at how each assessment item maps against each unit requirement.
Using a validation tool benefits both the validation process and documentation. It makes it easier to comprehend how each assessment item aligns with each unit requirement.
At the same time, it can serve as your document evidence that you have validated your resources before letting the students use them.
Simultaneously, it can serve as proof that you have validated your resources before they are used by students.

ASQA does not specify a required template for assessment tool validation, but many templates are accessible online. These tools usually have validators review the tools as a whole to ensure they meet the principles of assessment.

Principles of Assessment Yes/No/Partially Comments
1. Fair
2. Flexible
3. Valid
4. Reliable

Though these templates make validation easier, they often result in judgment errors due to limited space for comments on each assessment item.

A more detailed template is highly recommended for inspecting each unit requirement and the assessment items that align with them. Below is an example:

Element Performance Criteria Assessment Guidelines Benchmarks Assessment Instrument Rectification Recommendations
What do you Need to Check?
What Should Be Inspected?

As noted in our blog post Common Problems In Assessment Tools, your assessment tools must ensure trainers follow assessment principles and evidence rules.

Assessment Core Principles
Fairness – Is equal opportunity and access provided to everyone in the assessment process?

Flexibility – Does the assessment offer various ways to demonstrate competence according to different needs and preferences?

Validity – Is the assessment assessing what it is intended to assess? Is it a valid tool for evaluating the required skill or knowledge?

Reliability – Will the assessment yield consistent results each time, regardless of the trainer? Will different assessors make the same decision on skill competence?

Core Rules of Evidence

Validity – Does the evidence demonstrate that the candidate has the skills, knowledge, and attributes described in the unit of competency and associated assessment requirements?
Sufficiency – Is there enough evidence to ensure that the learner has the skills and knowledge required?
Sufficiency – Is the evidence enough to ensure the learner has the required skills and knowledge?

Authenticity – Is the assessment tool ensuring that the work is the candidate’s own?

Currency – Are the assessment tools based on current units of competency and up-to-date industry practices?

Despite being frequently covered in VET professional development and nationally recognised training, many tools still have issues with these requirements.

To prevent using learning resources that do not address some unit requirements, ensure you adhere to these guidelines:

Demonstrate What You Teach

Focus on the verbs used in the unit requirements and make sure they are addressed by the assessment item. For example, in the unit CHCECE032 Nurture babies and toddlers, one performance evidence requirement requires students to:

Complete each of the following tasks at least once with two different babies under 12 months old in a safe environment, using age-appropriate verbal and non-verbal communication per service and regulatory requirements:

nappy changing

bottle preparation, feeding babies from bottles, and cleaning equipment

prepare solids and feed infants

appropriately respond to infant signs and cues

prepare infants for sleep and settle them

monitor and foster physical exploration and gross motor skills appropriate for the age

Having students describe changing nappies for babies under 12 months doesn’t directly address the unit requirement. Unless it’s meant to assess underpinning knowledge (i.e., knowledge evidence), students should be performing the tasks.

Plurals Matter!
Pay attention to the numbers. In our example on one of the unit requirements of CHCECE032, this single unit requirement calls for the students to complete the tasks at least once on two different babies under 12 months of age. Having students complete the tasks listed twice on just 1 baby won’t cut it.
Mind the numbers. In our CHCECE032 example, one unit requirement asks students to complete the tasks at least once with two different babies under 12 months old. Doing the tasks twice with one baby won’t suffice.

Total or Not Competent

Mind the lists. In the previous example, if students perform only half the tasks listed, it’s non-compliant. Each assessment item must address all requirements, or the student is not yet competent and the assessment tool is non-compliant.
Can you be more specific?
Add More Specificity

Each assessment item must have clear and specific benchmark answers to guide the assessor’s judgment on the student’s competence. Therefore, it’s crucial that your instructions do not confuse students or assessors. For instance:
What kind of information can be included in a work package?
What information might be included in a work package?

The answer can include:

Necessary resources

Associated expenses

Duration of activities

Assigned roles and responsibilities

When an assessment item demands multiple answers, indicate the number of answers a student must provide. This ensures your assessment is reliable, and the evidence collected is valid.

This applies equally to assessment items with double-barrelled questions or questions that require more than one answer at the same time. These can confuse students and assessors, as illustrated in the example below:

Identify a hazard and/or environmental issue in the work area and pick the most effective hazard control hierarchy.

Answers can include, but are not limited to:

Weather conditions – isolation of work area, engineering controls, personal protective equipment

Work click here area and ground conditions – eliminating hazards, isolating, engineering

People – isolation, engineering controls, administration

Structural hazards – substitution, isolating, engineering controls

Chemical hazards – isolation, engineering, administrative controls

Equipment or machinery – isolation, engineering controls, administrative controls

Steering clear of double-barrelled questions simplifies responses for students and enables assessors to accurately judge competence.

Considering these requirements, you might think, “Don’t learning resource developers have audit guarantees?” But such guarantees require you to wait for an audit before rectifying noncompliance. This affects your compliance history, so it’s better to take a safe and compliant route.